Merion Pump & Equipment: Mechanical Equipment Sales, Custom Fabrications, Maintenance & Service, Repair Parts
Contact UsServicesProductsView Products by Product TypeView Products by ManufacturerABB VFDsAmber BoothCerlic Environmental CLA-VALConbracoCooling Tower SystemsCutler-HammerGoulds PumpsGPMGrundfos PumpsGeneral Treatment ProductsIslip Flow ControlsJohnston PumpsMECMiljocoMTH PumpsMPE SystemsReco/Mechanical Room SupplyPACO/SulzerPolarisProcoSharpe MixersSiemen'sTandem ChillersThe Cooling Tower CompanyTower-FloTower TechWater Technology of PensacolaWheatley/American HVACWintersWorldwide Water SystemsRental EquipmentNews
 


Cerlic Environmental

In addition to the TSS meter, Cerlic also produces these other devices which also utilize the same BB2 control box:

  1. CAT - Automatic Sludge Blanket Tracker
  2. Portable Sludge Blanket Monitor
  3. O2X - Submersible Dissolved Oxygen Sensor
  4. pHX and ReX Sensors
  5. FLX - Immersion Sensor for Open Channel Flo
  6. NV - Submersible Pressure Sensor.
  

1. CAT - Automatic Sludge Blanket Tracker
Optical transmitter using NIR light to detect solids
concentration or interface in clarifiers. Field adjustable blanket concentration setting. Sensor is lowered on pulse
from rake limit switch or timer. Sensor is lifted from the
liquid and flushed after each cycle.
Applications: Sludge blanket in WWTP and WTP clarifiers

2. Portable Sludge Blanket Monitor is used for detecting sludge level in WWTP and WTP clarifiers, settling tanks etc. Compact design and uses standard 9V battery with a life of over 50 hours of continuous operation.
Application: Sludge Judge replacement.

> Back to Top

3. O2X - Submersible Dissolved Oxygen Sensor
with built-in automatic flushing system. Output signal is held constant during flushing cycle. Only need to calibrate once every 6-12 months. Oxygen electrode is cartridge design with built-in temperature sensor for continuous compensation.
Optional: Analog 4-20 mA temperature output signal is available.
Application: aeration basins, final effluent w/ temperature output, SBR, etc.
4. pHX and ReX Sensors
pHX is ”Smart” calibrated with 4, 7, 10 buffers or manually with any buffers. ReX requires no calibration but can be checked with standard mV solutions. Flushing system is
normally supplied to alleviate cleaning of electrodes.
Applications pH: pHX influent, effluent, aeration basins, etc.
Applications ORP: ReX nitrification basins, chlorine contact basins, aeration basins, etc.

> Back to Top
   

5. FLX - Immersion Sensor for Open Channel Flo
Flow measurement using D/P (differential pressure) sensor accurate to 0.1”. Reliable measurement not effected by foam, wind or bouncing liquid surfaces. Ventilated cable compensates for atmospheric pressure changes. Very stable signal that does not drift with time. New zero and full range calibration feature.
Applications: Measure flow as a function of liquid height in open channels, aeration basins, clarifiers, weirs, etc.

  
    6. NV - Submersible Pressure Sensor.
Reliable and stable 4-20 mA output signal from 24 VDC loop power. 316SS membrane with protective cap and viton
cable. Atmospheric pressure compensation w/ ventilated cable. Easy to install due to small diameter of sensor. Ranges 16.4' (5 m), 34.5' (10.5 m) and 66' (20 m). Optional pvc/SS hanger.
Applications: lift stations, tanks, lakes, rivers, etc.

> Back to Top